Communicate with Supplier? Supplier
Kate Ms. Kate
What can I do for you?
Chat Now Contact Supplier

Shandong Heli Machinery Co.,Ltd

Home > Products > Roots Blower

Roots Blower

Product categories of Roots Blower, we are specialized manufacturers from China, Roots Blower, Three Lobe Blower suppliers/factory, wholesale high-quality products of Roots Air Blower R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!

China Roots Blower Suppliers

What is a Roots Blower?

A roots blower pump is a positive displacement rotary lobe pump that operates by pumping a fluid with a pair of meshing lobes not unlike a set of stretched gears. Fluid is then trapped in pockets surrounding the lobes and carried from the intake side to the exhaust.

Blower 0 Webp

What is the basic principle of a Roots Blower?

The roots blower`s principle consists of the following: the process starts with air flowing from the inlet port into the element chamber. The timed rotation of the rotors against the wall of the chamber creates a so-called [air flow direction". At this point, there is still atmospheric pressure in these chambers.

As soon as the first lobe passes the opening to the pressure side, the system pressure is adjusted. This is called isochoric compression. The rotors seal each other off to the inside, which prevents a change of pressure.

How does a Roots Blower operate?

A Roots blower operates using the isochoric compression principle, also known as external compression. The pressure increase is achieved by intermittently transporting a gaseous medium (e.g. atmospheric air) into a system.

By forcing the medium from atmospheric conditions into a system with a given resistance (e.g. a water column, distribution network), the relevant pressure increase is achieved. The roots blower will operate at a controlled output level to overcome this resistance.

What is the Heli Roots Blower series composed of?

The Heli[Roots Blower"; called HLSR, is composed of three conjugate lobe shaped rotors which rotate inside a pre-machined chamber. The chamber is sealed by the rotating rotors, and the rotors are synchronised by means of a timing 1:1 gear ratio, positioned at the end of the shafts.
Bearings are positioned externally to the compression chamber with an oil lubricated system. The drive shafts have labyrinth style oil seals, so called because of the labyrinth of grooves that the oil must pass through. The splash lubrication system uses a fine mist of oil for lubrication.

Hlsr Series 3 Lobe Roots Blower

Blower Parts Webp






New Products

Related Products List

Home

Phone

About Us

Inquiry